吊装安全须知!出现这些情况，吊装带立即报废停用

　　很多施工现场存在侥幸心理，轻微破损继续使用吊装带，易引发重物坠落事故。

　　依据国标规范，合成纤维吊装带出现以下任意一种状况，直接报废，严禁修补后继续使用：

　　1. 本体出现割伤、刺穿、有切口，承载纤维受损

　　2. 外层严重磨损，承重芯丝外露、大面积起毛断丝

　　3. 吊带遭受高温灼烧、熔化、化学腐蚀，材质硬化、变脆、变色

　　4. 缝合部位缝线断裂、脱线、织带边缘撕裂

　　5. 吊带发生扭结变形、长期挤压造成内部纤维断裂

　　6. 标识标签丢失、模糊不清，无法确认额定载荷

　　7. 曾遭遇冲击载荷、超载吊装、尖锐物体无防护吊装造成隐性损伤

温馨提示：

　　吊装棱角、尖锐工件时，一定要加装护角防护;定期日常巡检吊索具，安全无小事。

　　Many construction sites take chances and continue to use slightly damaged webbing slings, which may easily lead to load‑fall accidents.

　　In accordance with national standard specifications, a synthetic fibre webbing sling shall be scrapped directly and must not be repaired for further use if any of the following conditions exists:

　　Cuts, punctures or incisions on the sling body with damage to load‑bearing fibres

　　Severe outer‑layer abrasion, exposure of load‑bearing core yarns, extensive fuzzing and broken fibres

　　Exposure to high‑temperature burning, melting or chemical corrosion, resulting in hardened, brittle or discoloured material

　　Broken stitching, unravelled seams or torn edges of the sling webbing

　　Kinking and deformation of the sling, or internal fibre fracture caused by long‑term compression

　　Lost or illegible identification label making the rated working load unidentifiable

　　Hidden damage caused by shock loading, over‑load lifting, or lifting sharp‑edged objects without protection

Tips: Always fit corner protectors when lifting angular or sharp‑edged workpieces. Conduct regular routine inspections of lifting slings and rigging hardware. Safety is never trivial.